The ICON series from ASP - The ICON panel is the principal component of ASP’s signature ICON series.

ICON Series - By ASP

The Icon Panel is the principal component of ASP’s signature Icon Series. The Icon Panels’ patented design features have revolutionized the access floor industry.

The Panel Construction

SIZE 600mm x 600mm

DEPTH 33mm

CONSTRUCTION
The panels consist of a hardened steel top and bottom sheet plate with corrosion resistant protection, inside and out, encapsulating a structural cementitious core.

CORE Cementitious Compound

TOLERANCE
±0.25mm and a flatness tolerance of ±0.5mm measured on a diagonal across the top of the panel

FINISH
ASP’s standard powder coated finish.

CONNECTION
The panel is screw fixed to the pedestal head at all
four corners

ICON series panels

 

ICON X panel system.

Icon X is considered the classic system for commercial environments. It is widely used for power and data cable management.

 

ICON Rigid panel system.

Icon Rigid utilizes stringers to create a robust rigid grid under structure. This system allows the use of access flooring in environments that have requirements for higher underfloor void spaces, heavier live loads and/or prefinished panels through integration with the Concept + Series.

ICON Air panel system.

Icon Air is specifically designed for environments using an underfloor HVAC (heating, ventilation, and air conditioning) system.

This system incorporates the use of a clip on air tight stringer which creates a seal in between the panels to control and minimize air leakage. With the stringer seal, the underfloor cavity then converts into an air plenum.

 

ICON HD panel system.

Icon HD offers an upgrade on Icon X, Icon Rigid and Icon Air for panel loads of 9kN, 11kN and 13kN.

This upgrade incorporates thicker steel that the standard systems which provide a longer lifespan and comes with an extended product warranty of 20 years.

Icon HD is suitable for environments that are subject to regular heavy live rolling loads.